myiqos logo

Your first steps with Lil Solid

Getting started with your lil Solid

1. If you have a new lil Solid device and will be using it for the first time, first wake it up from sleep mode by pressing the button for 2 seconds or connecting the charger to the charging port. A full charge will take approximately 2 hours.
2. Slide open the Cover of the stick insertion part at the top of the device. Insert a tobacco stick with the tobacco part facing down.
3. Press the button for 2 seconds until vibration occurs. State LED blinks in ice blue and the device vibrates simultaneously. Preheating takes about 25 seconds depending on the use environment. When the preheating process ends, the State LED lights come on and vibrations occur simultaneously to indicate that the tobacco stick is ready for use. Your device is ready to use!
4. The experience lasts for 14 puffs or up to 5 mins, whichever comes first. 30 seconds prior to the end of the session or when the last 3 puffs are left the device will vibrate once and the State LED will blink in ice blue until the end of the session. When the session comes to an end, the State LED and the device turn off automatically. You do not need to press the button.
5. To extract the tobacco stick, twist the tobacco stick more than 3 times in one direction.
6. You may use the device up to 3 consecutive times without waiting time between 3 sticks. After that, it will take 3 minutes 30 seconds to cool down before you can start another session.

Charging your lil Solid

To check the charge level of the lil SOLID device press the Button or plug the device in a power outlet using the supplied USB Cable and AC Power Adaptor. The charging status of the device is displayed as follows:
- Blue (100 ~ 60% charged)
- Ice blue (60 ~ 30% charged)
- Orange (30 ~ 1% charged)
- Red (needs to be charged)

Cleaning your lil Solid

Always turn OFF the device before cleaning. Let it cool down after the last use. Remove the cap from the device. Insert the Cleaning Wiper into the device and clean the device by spinning the cleaning wiper. Insert the Cleaning Brush into the device and clean the device by spinning the cleaning brush. Also you can clean your device with Heat: quickly press the button 5 times (within 2 seconds). The State LED blinks in orange, for 90 seconds, and the cleaning process proceeds automatically. When the cleaning process ends, the State LED automatically goes OFF, and vibration occurs 2 times.

Tips from us, to you

lil solid 2.0

Rotate the patron three times when delayed

When you are done using, do not immediately delay the patron. Make at least three circular movements in the same direction as the cartridge, and then you can delay it.

See tutorial
lil solid 2.0

Always have a charged device

Don't forget to charge the battery on the lil SOLID 2.0 every day. Charging is faster if it is turned on on a stove than on the USB ports of your laptop or other device.

See tutorial
lil solid 2.0

Be careful of the LED bulb from the device

It's the first time you've used the device? Press the button for about 2 seconds or plug it into a charger. The LED bulb will light up twice in red, orange, blue or dark blue.

See tutorial

Support for your lil SOLID 2.0

Need support for your lil SOLID 2.0? How about some tips? Learn more on how to use, clean, and charge your lil SOLID 2.0, and find quick tips here.
You need help? Contact us!
We are here to help you across multiple channels.​
Keep up to date with all of our offers and news.
Send us your query and we will respond within 24h.
Find answers to frequently asked questions.
Give us a free call on 0800 99 099.
This product is not risk free, releases nicotine that causes addiction. For adult use only.