Meet the new “All in one” device - lil SOLID 2.0

We present to you lil SOLID 2.0 - the new "All in one" device that comes in two variants, Cosmic Blue and Stone Grey - with an irresistible price of 1,550 denars!

This July we "teamed up" with a new brand - lil, which is guided by the same vision as ours, and that is to offer a better alternative through a practical option and an affordable offer for all adult smokers.

The simple lil SOLID 2.0 heats the tobacco from the inside, using induction heating technology with a needle, which allows you to experience real tobacco, without ash and smoke and about 95% lower levels of harmful chemicals compared to cigarettes.*

*Source: Reductions in levels of a range of harmful chemicals (excluding nicotine) compared to the smoke of a reference cigarette. See Important Information on IQOS.com.

‘

"All in one" design, easy to use and recognizable by its light weight.

This simple and compact device with a modern design, allows up to 25 uses with a single charge (depending on how the battery is charged and the conditions of use). With no waiting between uses, this device allows 3 consecutive uses.

After the initial introduction to lil SOLID 2.0, we move on to how to use the device and how to take care of it. And all this in just a few simple steps :

At the beginning of using lil SOLID 2.0 you need to:

1. Press and hold the button for 2 seconds to turn on the device. After activating it, the device will vibrate 2 times and the LED light will start flashing.
2. Open the cover of the device and insert a cartridge into it.
3. Press the button again and hold for 2 seconds. The device will vibrate, signaling the start of heating.
4. After 25 seconds, the device will vibrate again, which means it’s ready for use.

To end the use of lil SOLID 2.0 you need to follow the following steps:

1. The device vibrates and flashes to signal the last 3 puffs or the remaining 30 seconds, whichever comes first.
2. When the use is complete, the device switches off automatically.
3. Turn the cartridge more than 3 times in the same direction, then remove it.
4. Close the lid.

And that's all, your device is ready for a new usage cicle.

Cleaning the device is even simpler :

1. Switch off the device and let it cool down. Remove the cover.
2. Insert the dual cleaner into the appliance and clean in a circular motion.
3. Insert the cleaning brush into the appliance and clean in a circular motion.

The option is to clean the appliance by heating it as follows:

1. Quickly press the start button 5 times.
2. The LED will start flashing orange for 90 seconds, allowing the cleaning to be performed automatically.
3. When the cleaning is completed, the light will go out automatically, after which you will feel a double vibration.

By pressing the button or turning on the charger device, the battery status is displayed via this status LED. When the device is charging, the status LED:

1. Flashes while the device is charging.
2. Turns off when the device is full.

The introduction of this new device is just another step towards the ultimate goal of Philip Morris International - securing a smoke-free future.