lil SOLID Ez

lil SOLID Ez is a simple to use one-piece device to enjoy heated tobacco experience without the hassle of ash, smoke or cigarette smoke smell.

It heats tobacco from the inside by a stainless-steel pin for consistent tobacco experiences.

With lil SOLID Ez you will enjoy:

• - Consistent heated tobacco experiences, with 3 back-to-back consecutive uses
• - Up to 25 experiences on a single charge*
• - 5 minutes duration of one session

Available in 5 new colours: Black, Mint, Rose Gold, Blue and White.

lil SOLID Ez is designed to be used only with specialy designed tobacco sticks.

*Subject to battery performance degradation and conditions of use.

lil SOLID Ez and lil SOLID 2.0 - are both alternatives to cigarette smoking.

lil™ SOLID Ez is the next generation of lil™ SOLID 2.0, all-in-one tobacco heating device introduced by IQOS™

What’s new:

• 1. Heating technology – resistive heating with a pin
• 2. New device finishing - glossy finish
• 3. New 5 colours: Black, Mint, Rose Gold, Blue and White
• 4. Smaller & lighter – 78.9 gr for lil SOLID Ez vs 98.8 gr for lil SOLID 2.0
• 5. New additional cleaning tool – lil SOLID Cleaner Pro, for cleaning the cap and around the pin. Sold separately.

The serial number of lil SOLID Ez is displayed under the cap of the device.

Both devices – lil SOLID Ez and IQOS ORIGINALS - are tobacco heating systems and heat tobacco from inside. However, there are some differences:

IQOS ORIGINALS

Iconic

• - Portfolio of devices & colours, stylish accessories to customize your device
• - Blade heating technology

lil™ SOLID Ez Introduced by IQOS™

Simple and affordable

• - Simple & robust design, device in 5 colours & basic accessories
• - Pin heating technology

With both technologies you can enjoy the taste of the real tobacco without fire, smoke and ash.

It is your own preferences, goals and budget that define your choice.

Whether you choose lil™ SOLID Ez or IQOS ORIGINALS, they are both smoke-free products and a better choice than continued smoking.

Important information: they both are not risk free and provide nicotine which is addictive.

You receive the new device in sleep mode. To wake up the device, press the button for 2 seconds or connect the charger to the charging port.

Once the device is activated, the Status LED blinks in ice blue for one second and vibration occurs twice, simultaneously.

We recommend to fully charge your new Iil SOLID Ez device with the supplied AC Power Adaptor before using it. It takes up to 2 hours.

Slide and open the cover of the stick insertion part at the top of the device and insert a tobacco stick with the tobacco part of the stick facing down. Press the stick until it touches the bottom of the stick insertion part.

To start your device, press the button for 2 seconds until vibration occurs.

Preheating will last for about 25 seconds. The duration time of the preheating process can vary according to the use environment.

When the preheating process ends, the Status LED lights illuminate, and vibration occurs simultaneously. The stick is ready for use.

To signal the last 30 seconds of the session or the last 3 puffs, whichever comes first, the device will vibrate once and the Status LED will blink in ice blue until the end of the session.

At the end of the session, the Status LED and the device turn off automatically. You do not need to press the Button.

Remove the tobacco stick after the end of the experience:
Rotate the stick to one direction 3 times or more and pull the stick out of the device.

Close the cover of the device to prevent any foreign particles from entering.

You may use the device up to 3 consecutive times without waiting time. After 3 consecutive uses (within 18 minutes) the device will cool down automatically. Please wait. It will take 3,5 minutes before you can use another tobacco stick.

To check the charge level of lil SOLID Ez, short press the button or plug the device in a power outlet using the supplied USB Cable and AC Power Adaptor. The Status LED light will indicate the current charge level of your device.

Although Iil™ SOLID device does not require a full charge to work, we recommend to fully charge it before the first use.

To reset your lil SOLID Ez, press the button for 8 seconds, even if vibration occurs within 2 seconds. The State LED will blink twice in red, orange, ice blue and blue, sequentially.

The device is completely reset when the State LED lights blinks in ice blue for 1 second, and vibration occurs twice, simultaneously.

It is important to keep your device clean from any foreign particles, remnants or dust. For this, please, keep the lid closed at any time after the use. For optimal experience, clean your device after every 20 uses. You can clean your lil SOLID Ez in three ways: with a Dual Cleaner (comes with the device), by cleaning with heat* or with a lil SOLID Cleaner Pro (sold separately).

Cleaning with the Dual Cleaner:

To use the Cleaning Brush, gently snap open the side with the (multiple dots) mark.
To use the Cleaning Wiper, gently snap open the side with the ⊙ (circle) mark.
Remove the cap from the cooled device and insert the Cleaning Wiper into the heating chamber and clean by spinning the wiper.
Insert the Cleaning Brush into the heating chamber and clean by spinning the brush.

Cleaning with Heat*:

To clean with heat, quickly press the button 5 times (within 2 seconds).
The State LED will blink orange for 90 seconds and the cleaning process happens automatically.
When the cleaning process ends, the State LED automatically goes OFF, and vibration occurs 2 times.
* Cleaning with heat means heating the remnants stuck to the heater. The heater can get very hot, so do not let anything come into contact with the heater during or immediately after cleaning with heat.

To reduce residual tobacco smell after removing hard particles, use the cleaning sticks.

Solid red light for 2 sec with two vibrations -> low battery
Please charge your device

Red light blinks 5 times -> device malfunciton
Reset the device by pressing the button for 8 seconds, even if vibration occurs within 2 seconds.

Orange light blinks 3 times -> device needs to cool down or exceeds operating temperature range
After 3 consecutive uses (within 18 minutes) - an orange light indicates that the device needs to cool down. The device will be put in the cool down mode automatically. Please wait. It will take 3,5 minutes before you can use another stick.
It could also indicate that the temperature has gone beyond the operating temperature 0~40℃.

Orange light blinks 2 times -> liquid ingression
Please do not use the device and dry it until the light stops blinking. If the light does not stop blinking, please, contact us at Customer Support Center at 0800 77 077 or visit us at the nearest IQOS zone.

Blinking green light and device not responding -> device in updating mode
To interrupt the update process, disconnect the device from the power source.

The lingering smell most probably comes from the non-regular or non-thorough cleaning. We recommend cleaning the device on a regular basis after using 1 pack of tobacco sticks.

If you continue to use the device without removing the debris or remnants, the device can heat up the remnants, which can produce the lingering smell.